Search
Now showing items 1-10 of 12
Applicability of angular orientations of gating designs to quality of sand casting components using two-cavity mould set-up.
(2021-10-28)
This study aimed to examine the integrity of two-cavity sand casting products in relation to the angular orientation of gating design. Two angular orientations of 60 and 45 were investigated experimentally and numerically ...
Bio-mediated Synthesis of Nanomaterials for Packaging Applications
(Materials Research Forum LLC, 2021-10-15)
Change in lifestyle of humans in this present generation with huge dependence on packaging materials has encouraged several studies on development of new variety of packaging materials. Emphasis on replacement of existing ...
Recycling of composite materials
(Springer Nature, 2021-07-01)
Usage of composite material is rising across various sectors such as automotive, wind energy and aerospace. Compared to metal matrix composites (MMCs) and ceramic matrix composites (CMCs), thermoset based polymer matrix ...
3D printing of PEEK and its composite to increase biointerfaces as a biomedical material - A review
(2021-07-01)
Poly ether-ether-ketone (PEEK) is a polymer with better lignin biocompatibility than other polymers. It is good for biomedical engineering applications. This research summarises the outcomes of an evaluation conducted on ...
Characterization and optimization of influence of MoS2 hybridization on tribological behaviours of Mg–B4C composites
(2021-06-21)
Aerospace and automobile industries are facing with challenges in developing lightweight materials with high corrosion and wear resistance. The magnesium (Mg) alloys are superior to their monolithics, as they have maximum ...
Conventional and Additively Manufactured Stainless Steels: A Review
(2021-06-17)
For the last three decades, enormous manufacturing processes have been widely employed in the field of transportation (aviation, automobile and marine) as well as various industrial sectors. Among the invented techniques, ...
Mechanical performances of hip implant design and fabrication with PEEK composite
(2021-06-01)
Artificial bone implant materials need porosity for nutrient distribution, moderate pore size to provide cell cultures and bone-like mechanical properties. The homogenisation of discrepancies between the microstructure of ...
Tribological analysis of engineering plastics/steel friction pairs
(2021-04-17)
This study involves the case of polymer–metal contact, where deformation and strain behavior play a significant role. In present work, a section of polymer gear is mated against steel gear, and the friction behaviors for ...
Mechanical, interfacial and thermal properties of silica aerogel-infused flax/epoxy composites
(2021-03-09)
The mechanical, interfacial and thermal properties of a flax/epoxy composite incorporated with a silica aerogel (SA) at0.5, 1.0 and 2.0 wt.% were examined in this work. A set of maximum enhancements of 8.7%, 9.0% and 24.0 ...
Influence of Drill Geometry Design on Drilling-Induced Damage Reduction in Fibre-Reinforced Polymeric Composites
(Springer Nature, 2021-02-18)
Drilling is an extensively used manufacturing process for boring different and widely used fibre-reinforced polymeric (FRP) composite materials, among various machining operations. This process is inevitable for ...