| dc.contributor.author | Xiao, Y. | |
| dc.contributor.author | Wu, B. | |
| dc.contributor.author | De Winter, F.A. | |
| dc.contributor.author | Sotudeh, R. | |
| dc.date.accessioned | 2008-02-06T11:49:34Z | |
| dc.date.available | 2008-02-06T11:49:34Z | |
| dc.date.issued | 1998 | |
| dc.identifier.citation | Xiao , Y , Wu , B , De Winter , F A & Sotudeh , R 1998 , ' A dual GTO current-source converter topology with sinusoidal inputs for high-power applications ' , IEEE Transactions on Industry Applications , vol. 34 , no. 4 , pp. 878-884 . https://doi.org/10.1109/28.703998 | |
| dc.identifier.issn | 0093-9994 | |
| dc.identifier.other | dspace: 2299/1590 | |
| dc.identifier.uri | http://hdl.handle.net/2299/1590 | |
| dc.description | This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder.---- Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. | |
| dc.description.abstract | A dual gate-turn-off thyristor current-source converter topology with sinusoidal inputs is proposed for high-power applications. The sinusoidal input current is realized by using pulsewidth modulation techniques to eliminate 11th and 13th harmonics and a transformer to cancel 5th, 7th, 17th, and 19th harmonics. Three switching patterns are proposed with a switching frequency of 360 or 420 Hz. The combination of these switching patterns provides a full-range control over the dc output current. Resonant modes of the proposed system are identified, and the criterion for the line capacitor design is provided. Simulation and experimental results are given to verify the theoretical analysis. | en |
| dc.format.extent | 220042 | |
| dc.language.iso | eng | |
| dc.relation.ispartof | IEEE Transactions on Industry Applications | |
| dc.title | A dual GTO current-source converter topology with sinusoidal inputs for high-power applications | en |
| dc.contributor.institution | School of Engineering and Technology | |
| dc.description.status | Peer reviewed | |
| rioxxterms.versionofrecord | 10.1109/28.703998 | |
| rioxxterms.type | Journal Article/Review | |
| herts.preservation.rarelyaccessed | true | |
