Show simple item record

dc.contributor.authorAmafabia, Daerefa-A Mitsheal
dc.description.abstractNowadays, composite materials are widely used in several industries, e.g. the aeronautical, automotive, and marine, due to their excellent properties, such as stiffness and strength to weight ratios and high resistance to corrosion. However, they are prone to develop Barely Visible Impact Damage (BVID) from low to medium energy impacts (i.e. 1 – 10 m/s and 11 – 30 m/s respectively) that are reported to occur during both service and maintenance, such as bird strike; hailstones and tool drops. Therefore, Structural Health Monitoring (SHM) techniques have been developed to allow identifying damage at an early stage, in an attempt to avoid catastrophic consequences. Vibration measurement was conducted on healthy and damaged Carbon Fibre Reinforced Polymers (CFRPs) specimens. Damage is introduced to the specimen through a static indentation and the work done by the hemispherical indenter measured. This test was mainly for the purpose of damage introduction in the test samples. In this work, the effects of damage on the individual mode were studied to understand the response pattern of the modal parameters. It is intended that the current study will inform the development of a new damage identification method based on the variations between healthy and damaged specimen’s dynamic results. A new modal identification method (“Elliptical Plane”) that uses an alternative plot of the receptance has been developed in this work. The Elliptical Plane method used the energy dissipated per cycle of vibration as a starting point, to identify modal constants from Frequency Response Functions (FRFs). In comparison with the method of inverse, this new method produces accurate results, for systems that are lightly damped with its modes well-spaced. The sine of the phase of the receptance is plotted against the amplitude of the receptance, through which damping was calculated from the slope of a linear fit to the resulting plot. The results show that, there are other relevant properties of the plot that were not yet delve into by researchers. The shape of the plot is elliptical, near the resonant frequencies, whereby both parts of the modal constants (real and imaginary) can be determined from numerical curve-fitting. The method offers a new perspective on the way the receptance may be represented, in the Elliptical Plane, which may bring valuable insights for other researchers in the field. The novel method is discussed through both numerical and experimental examples. It is a simple method and easy to use. Interestingly, as the energy level increases, the percentage changes in both the modal frequency and damping increases. The linear equations reveal that there is a correlation between the increase in energy and the percentage variation in modal frequency and damping, especially from a threshold energy level determined to be between 15J and 20J for the analysed cases. Finally, modal identification is conducted on the healthy and damaged specimens, and the results were analysed with BETAlab software and the Elliptical Modal identification method. It was observed that the Elliptical Modal identification method provides some interesting results. For instance, a comparison between the modal damping from the ellipse and BETAlab methods revealed that, the level of reduction in the modal damping from the ellipse method is higher than that of the BETAlab. This behaviour offers a promising future in the area of damage identification in structures.en_US
dc.rightsAttribution 3.0 United States*
dc.subjectElliptical Methoden_US
dc.subjectElliptical Areaen_US
dc.subjectElliptical Planeen_US
dc.subjectBarely Visible Impact Damage (BVID)en_US
dc.subjectModal Parametersen_US
dc.subjectModal Identificationen_US
dc.subjectModal Constantsen_US
dc.subjectExperimental Modal Analysis (EMA)en_US
dc.subjectDissipated Energyen_US
dc.subjectStructural Health Monitoring (SHM)en_US
dc.subjectDamage Detectionen_US
dc.subjectFrequency Response Function (FRF)en_US
dc.subjectComposite Structuresen_US
dc.subjectDamage Identificationen_US
dc.subjectFailure Mechanismsen_US
dc.subjectLow Impacten_US
dc.titleAnalysis of the Response of Modal Parameters to Damage in CFRP Laminates Using a Novel Modal Identification Methoden_US
rioxxterms.funderDefault funderen_US
rioxxterms.identifier.projectDefault projecten_US

Files in this item


This item appears in the following Collection(s)

Show simple item record

Except where otherwise noted, this item's license is described as info:eu-repo/semantics/openAccess