Show simple item record

dc.contributor.authorWen, Lehu
dc.contributor.authorGao, Steven
dc.contributor.authorHu, Wei
dc.contributor.authorLuo, Qi
dc.contributor.authorYang, Xue-Xia
dc.contributor.authorSanz-Izquierdo, Benito
dc.date.accessioned2022-01-31T14:45:02Z
dc.date.available2022-01-31T14:45:02Z
dc.date.issued2022-01-28
dc.identifier.citationWen , L , Gao , S , Hu , W , Luo , Q , Yang , X-X & Sanz-Izquierdo , B 2022 , ' Wideband Differentially-Fed Slot Antenna and Array With Circularly Polarized Radiation for Millimeter-Wave Applications ' , IEEE Transactions on Antennas and Propagation . https://doi.org/10.1109/TAP.2022.3145481
dc.identifier.issn0018-926X
dc.identifier.otherBibtex: 9695947
dc.identifier.otherORCID: /0000-0001-9000-4133/work/107674777
dc.identifier.urihttp://hdl.handle.net/2299/25342
dc.description© 2022 IEEE - All rights reserved. This is the accepted manuscript version of the accepted manuscript version of an article which has been published in final form at https://doi.org/10.1109/TAP.2022.3145481
dc.description.abstractA wideband differentially-fed slot antenna is presented for millimeter-wave (mmWave) applications. A novel method of using stepped corner-shaped slot is first utilized to establish the wideband circularly polarized (CP) radiation. In the configuration of corner-shaped slot, two wide open slots at the ends are utilized for effective orthogonal radiation, while the narrow slot at the center is utilized for power transmission and quadrature phase delay. An equivalent circuit is given to illustrate the inner working principle for CP radiation. In addition, square cuts are etched on the four corners of the radiating patches to further increase the axial ratio (AR) and impedance bandwidth. Based on this design concept, the antenna element was first designed and fabricated for performance verification. Then, a 1×4 linear array with beam scanning performance and a 4×4 planar array with high gain and stable radiation were designed and fabricated. Both the simulated and measured results show that the 1×4 linear array and 4×4 planar array can have wide overlapped impedance and AR bandwidths of 30.6% and 33.6% with thickness of 0.16λ0. The advantages of compact size and wide bandwidth make the presented antenna a good candidate for mmWave applications.en
dc.format.extent11
dc.format.extent2493741
dc.language.isoeng
dc.relation.ispartofIEEE Transactions on Antennas and Propagation
dc.titleWideband Differentially-Fed Slot Antenna and Array With Circularly Polarized Radiation for Millimeter-Wave Applicationsen
dc.contributor.institutionDepartment of Engineering and Technology
dc.contributor.institutionCentre for Engineering Research
dc.contributor.institutionCommunications and Intelligent Systems
dc.contributor.institutionSchool of Physics, Engineering & Computer Science
dc.description.statusPeer reviewed
rioxxterms.versionofrecord10.1109/TAP.2022.3145481
rioxxterms.typeJournal Article/Review
herts.preservation.rarelyaccessedtrue


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record