Show simple item record

dc.contributor.authorHasan, M.
dc.contributor.authorSun, Y.
dc.contributor.authorZhu, Y.
dc.date.accessioned2010-08-11T14:30:57Z
dc.date.available2010-08-11T14:30:57Z
dc.date.issued2005
dc.identifier.citationHasan , M , Sun , Y & Zhu , Y 2005 , ' Second-order OTA-C filters using a single OTA ' , Procs of the , vol. 2005 , pp. 201-204 . https://doi.org/10.1109/ECCTD.2005.1523028
dc.identifier.otherdspace: 2299/4751
dc.identifier.urihttp://hdl.handle.net/2299/4751
dc.description“This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”
dc.description.abstractA new voltage-mode second-order low pass OTA-C filter is proposed. The filter is integrator-based and uses only one OTA and two grounded capacitors. A multiple-input operational transconductance amplifier (OTA) for the simulation of the proposed filter is also described. The filter has been simulated using a 0.25μm CMOS process. The results show that for a cutoff frequency of 50 MHz, the filter dissipates 5.3mW power from a single 2V supply. The dynamic range and RMS noise are 63dB and 91μV (up to 100MHz), respectively. Further advantages of the proposed filter are frequency tunability, low sensitivity, low component count and ease of design. A current-mode equivalent of similar features and possibly better performance is also presented.en
dc.format.extent130418
dc.language.isoeng
dc.relation.ispartofProcs of the
dc.titleSecond-order OTA-C filters using a single OTAen
dc.contributor.institutionSchool of Engineering and Technology
dc.contributor.institutionScience & Technology Research Institute
dc.description.statusPeer reviewed
rioxxterms.versionofrecord10.1109/ECCTD.2005.1523028
rioxxterms.typeJournal Article/Review
herts.preservation.rarelyaccessedtrue


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record