Recently added

EnviGuard - Short Second Project Update Report (D8.4)

Lorenzo, Antonia; Johnston, Ian; Suckow, Bjorn; Veenstra, Theo; Dortu, Fabian; Comago, Inaki; Hanken, Thomas; Metfies, Katja; Klarholz, Ingo; Munro, Ian; Tracey, Mark (BioAzul, 2016-04-01)

EnviGuard - First Periodic Report (D8.3)

Lorenzo, Antonia; Johnston, Ian; Suckow, Bjorn; Tracey, Mark; Hanken, Thomas; Veenstra, Theo; Metfies, Katja; Klarholz, Ingo; Peterson, wilhelm; Comago, Inaki; Riesgo, Teresa; Dortu, Fabian; Gowland, Dennis (BioAzul, 2015-07-30)

Updated version of the PUDF (D7.8)

Suckow, Bjorn; Johnston, Ian; Metfies, Katja; Hanken, Thomas; Comago, Inaki; Dortu, Fabian; Veenstra, Theo; Gowland, Dennis; Carcajona, Daniel; Lorenzo, Antonia (BioAzul, 2016-11-30)

Test report - initial tests (D5.6)

Suckow, Bjorn; Johnston, Ian; Kaye, Richard; Comago, Inaki; Dortu, Fabian; Hanken, Thomas (Technologie-Transfer-Zentrum Bremerhaven, 2016-11-30)

EnviGuard - First short project-update report (D8.2)

Lorenzo, Antonia; Johnston, Ian; Suckow, Bjorn; Metfies, Katja; Tracey, Mark; Comago, Inaki; Dortu, Fabian; Riesgo, Teresa; Gowland, Dennis (BioAzul, 2014-11-28)

First prototype ready for initial tests (D5.5)

Suckow, Bjorn; Johnston, Ian; Hanken, Thomas; Comago, Inaki; Veenstra, Theo; Dortu, Fabian; Kaye, Richard; Munro, Ian (Technologie-Transfer-Zentrum Bremerhaven, 2016-11-30)

Development report EnviGuard Port physical components (D5.4)

Suckow, Bjorn; Johnston, Ian; Hanken, Thomas; Dortu, Fabian; Riesgo, Teresa; Veenstra, Theo; Munro, Ian (Technologie-Transfer-Zentrum Bremerhaven, 2017-01-19)

EnviGuard modules ready for installation in prototype (D5.2)

Suckow, Bjorn; Johnston, Ian; Kaye, Richard; Klarholz, Ingo; Dortu, Fabian; Riesgo, Teresa; Metfies, Katja; Peterson, wilhelm; Comago, Inaki; Veenstra, Theo; Hanken, Thomas (Technologie-Transfer-Zentrum Bremerhaven, 2016-10-31)

SOP for the Virus Detection Unit (D3.4)

Johnston, Ian; Kaye, Richard; Tracey, Mark; Munro, Ian; Klarholz, Ingo; Suckow, Bjorn (UH, 2017-08-30)

A ready to use prototype which works at bench scale with artificial contaminated water samples from the end user sides (D3.3)

Johnston, Ian; Kaye, Richard; Tracey, Mark; Munro, Ian; Suckow, Bjorn; Jewan, Christine; Klarholz, Ingo (UH, 2017-09-05)

An optical detection unit which is able to read out and quantify molecular signals generated by the bio-activated chip (D3.2)

Johnston, Ian; Kaye, Richard; Tracey, Mark; Munro, Ian (UH, 2017-07-31)

Interim report and pre-build design - (D3.2): Worn Bio-detector Phase 2

McCluskey, Daniel; Coudron, Loic; Munro, Ian; Lodge, Matthew; Baxter, Richard; Johnston, Ian; Tracey, Mark (UH, 2017-10-31)

Design Review of ESP/EWOD/ESP Translation Mechanisms - (D3.1): Worn Bio-detector Phase 2

McCluskey, Daniel; Lodge, Matthew; Coudron, Loic; Munro, Ian (UH, 2017-10-31)

Performance and functionality assessment of the EWOD system (D2.1): Worn Bio-detector Phase 2

McCluskey, Daniel; Coudron, Loic; Johnston, Ian; Baxter, Richard; Munro, Ian (UH, 2017-10-31)

Design & Development of the electronics and control system - (D6.1): Worn Bio-detector Phase 2

McCluskey, Daniel; Munro, Ian; Coudron, Loic (UH, 2017-10-31)

Performance Optimisation of the ESP System - (D1.1): Worn Bio-detector Phase 2

McCluskey, Daniel; Coudron, Loic; Baxter, Richard; Munro, Ian (UH, 2017-10-31)

Wet Foam Elution Report - (D06) : Development of Wet Foam Method of Extraction of BW Simulants from Aerosol Filters

Tan, Christabel; Johnston, Ian; McCluskey, Daniel; Tracey, Mark; Coudron, Loic; Munro, Ian; Lodge, Matthew; Kaye, Richard; Baxter, Richard (UH MEMS, 2017-05-19)

Final Report on prototype unit for enhanced experimental testing and performance characterisation - (D01) : Hardened ASEF (H-ASEF)

McCluskey, Daniel; Lodge, Matthew; Munro, Ian; Kaye, Richard; Johnston, Ian; Tracey, Mark (UH MEMS, 2017-03-29)

Report on Stage 2 Inlet Testing : Thales Group SPINNAKER evaluation

McCluskey, Daniel; Baxter, Richard; Lodge, Matthew; Tracey, Mark; Johnston, Ian; Coudron, Loic; Tan, Christabel (Thales Group, 2016-03-29)

Report on Stage 1 Elution Testing : Thales Group SPINNAKER evaluation

McCluskey, Daniel; Tan, Christabel; Baxter, Richard; Johnston, Ian; Tracey, Mark; Coudron, Loic; Lodge, Matthew (Thales Group, 2016-02-06)

University of Hertfordshire Research Archive

Research publications: Recent submissions

EnviGuard - Short Second Project Update Report (D8.4)

EnviGuard - First Periodic Report (D8.3)

Updated version of the PUDF (D7.8)

Test report - initial tests (D5.6)

EnviGuard - First short project-update report (D8.2)

First prototype ready for initial tests (D5.5)

Development report EnviGuard Port physical components (D5.4)

EnviGuard modules ready for installation in prototype (D5.2)

SOP for the Virus Detection Unit (D3.4)

A ready to use prototype which works at bench scale with artificial contaminated water samples from the end user sides (D3.3)

An optical detection unit which is able to read out and quantify molecular signals generated by the bio-activated chip (D3.2)

Interim report and pre-build design - (D3.2): Worn Bio-detector Phase 2

Design Review of ESP/EWOD/ESP Translation Mechanisms - (D3.1): Worn Bio-detector Phase 2

Performance and functionality assessment of the EWOD system (D2.1): Worn Bio-detector Phase 2

Design & Development of the electronics and control system - (D6.1): Worn Bio-detector Phase 2

Performance Optimisation of the ESP System - (D1.1): Worn Bio-detector Phase 2

Wet Foam Elution Report - (D06) : Development of Wet Foam Method of Extraction of BW Simulants from Aerosol Filters

Final Report on prototype unit for enhanced experimental testing and performance characterisation - (D01) : Hardened ASEF (H-ASEF)

Report on Stage 2 Inlet Testing : Thales Group SPINNAKER evaluation

Report on Stage 1 Elution Testing : Thales Group SPINNAKER evaluation

Research publications: Recent submissions

EnviGuard - Short Second Project Update Report (D8.4) ﻿

EnviGuard - First Periodic Report (D8.3) ﻿

Updated version of the PUDF (D7.8) ﻿

Test report - initial tests (D5.6) ﻿

EnviGuard - First short project-update report (D8.2) ﻿

First prototype ready for initial tests (D5.5) ﻿

Development report EnviGuard Port physical components (D5.4) ﻿

EnviGuard modules ready for installation in prototype (D5.2) ﻿

SOP for the Virus Detection Unit (D3.4) ﻿

A ready to use prototype which works at bench scale with artificial contaminated water samples from the end user sides (D3.3) ﻿

An optical detection unit which is able to read out and quantify molecular signals generated by the bio-activated chip (D3.2) ﻿

Interim report and pre-build design - (D3.2): Worn Bio-detector Phase 2 ﻿

Design Review of ESP/EWOD/ESP Translation Mechanisms - (D3.1): Worn Bio-detector Phase 2 ﻿

Performance and functionality assessment of the EWOD system (D2.1): Worn Bio-detector Phase 2 ﻿

Design & Development of the electronics and control system - (D6.1): Worn Bio-detector Phase 2 ﻿

Performance Optimisation of the ESP System - (D1.1): Worn Bio-detector Phase 2 ﻿

Wet Foam Elution Report - (D06) : Development of Wet Foam Method of Extraction of BW Simulants from Aerosol Filters ﻿

Final Report on prototype unit for enhanced experimental testing and performance characterisation - (D01) : Hardened ASEF (H-ASEF) ﻿

Report on Stage 2 Inlet Testing : Thales Group SPINNAKER evaluation ﻿

Report on Stage 1 Elution Testing : Thales Group SPINNAKER evaluation ﻿

EnviGuard - Short Second Project Update Report (D8.4)

EnviGuard - First Periodic Report (D8.3)

Updated version of the PUDF (D7.8)

Test report - initial tests (D5.6)

EnviGuard - First short project-update report (D8.2)

First prototype ready for initial tests (D5.5)

Development report EnviGuard Port physical components (D5.4)

EnviGuard modules ready for installation in prototype (D5.2)

SOP for the Virus Detection Unit (D3.4)

A ready to use prototype which works at bench scale with artificial contaminated water samples from the end user sides (D3.3)

An optical detection unit which is able to read out and quantify molecular signals generated by the bio-activated chip (D3.2)

Interim report and pre-build design - (D3.2): Worn Bio-detector Phase 2

Design Review of ESP/EWOD/ESP Translation Mechanisms - (D3.1): Worn Bio-detector Phase 2

Performance and functionality assessment of the EWOD system (D2.1): Worn Bio-detector Phase 2

Design & Development of the electronics and control system - (D6.1): Worn Bio-detector Phase 2

Performance Optimisation of the ESP System - (D1.1): Worn Bio-detector Phase 2

Wet Foam Elution Report - (D06) : Development of Wet Foam Method of Extraction of BW Simulants from Aerosol Filters

Final Report on prototype unit for enhanced experimental testing and performance characterisation - (D01) : Hardened ASEF (H-ASEF)

Report on Stage 2 Inlet Testing : Thales Group SPINNAKER evaluation

Report on Stage 1 Elution Testing : Thales Group SPINNAKER evaluation