Show simple item record

dc.contributor.authorMontalvao, D.
dc.contributor.authorRibeiro, A. M. R.
dc.contributor.authorDuarte-Silva, J.
dc.date.accessioned2013-02-05T09:00:20Z
dc.date.available2013-02-05T09:00:20Z
dc.date.issued2009-08
dc.identifier.citationMontalvao , D , Ribeiro , A M R & Duarte-Silva , J 2009 , ' A method for the localization of damage in a CFRP plate using damping ' , Mechanical Systems and Signal Processing , vol. 23 , no. 6 , pp. 1846-1854 . https://doi.org/10.1016/j.ymssp.2008.08.011
dc.identifier.issn0888-3270
dc.identifier.otherPURE: 669503
dc.identifier.otherPURE UUID: a3fa52dd-1ce7-447a-96ae-1963093aa45c
dc.identifier.otherWOS: 000267143300010
dc.identifier.otherScopus: 67349277096
dc.identifier.urihttp://hdl.handle.net/2299/9856
dc.description.abstractIn the past 25 years, the scientific and industrial communities have made great efforts on the fields of damage detection and structural health monitoring (SHM). However. no single approach has proven appropriate for all situations. Composite materials, which are receiving an increasing attention in the aeronautical industry. namely carbon fibre reinforced plastics (CFRP), are very sensitive to impacts of medium and low energy. Typically, barely visible impact damage (BVID) will occur, constituting an unsafe failure of difficult assessment. To assess (detect, locate and quantify) damage in this kind of material is still a challenge, especially if a huge amount of sensors or expensive equipments at hand are not used. In this work, a methodology that makes use of a reduced amount of conventional sensors is explored, with the aim of locating damage for a low cost on components that are subjected to impacts during service. This represents a considerable benefit, namely for the assessment of damage in aeronautical components, compared to most methods used today. This work can also give a major contribution to the research community since uncommon approaches will be used to model damage in composite materials, namely the modal damping factor as the main feature for damage localization. (C) 2008 Elsevier Ltd. All rights reserved.en
dc.format.extent9
dc.language.isoeng
dc.relation.ispartofMechanical Systems and Signal Processing
dc.rightsOpen
dc.subjectStructural health monitoring
dc.subjectDamage
dc.subjectDelamination
dc.subjectDamping
dc.subjectComposite
dc.subjectVibration
dc.subjectCOMPOSITE
dc.titleA method for the localization of damage in a CFRP plate using dampingen
dc.contributor.institutionSchool of Engineering and Technology
dc.contributor.institutionScience & Technology Research Institute
dc.contributor.institutionMaterials and Structures
dc.description.statusPeer reviewed
dc.relation.schoolSchool of Engineering and Technology
dc.description.versiontypeFinal Accepted Version
dcterms.dateAccepted2009-08
rioxxterms.versionVoR
rioxxterms.versionAM
rioxxterms.versionofrecordhttps://doi.org/10.1016/j.ymssp.2008.08.011
rioxxterms.typeJournal Article/Review
herts.preservation.rarelyaccessedtrue
herts.rights.accesstypeOpen


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record