Design of current-mode gm-C MLF elliptic filters for wireless receivers

Zhu, X., Sun, Y. and Moritz, J. (2008) Design of current-mode gm-C MLF elliptic filters for wireless receivers. In: UNSPECIFIED.

Copy

Two CMOS fifth-order gm-C elliptic lowpass filters based on the current-mode multiple loop feedback (MLF) leap-frog (LF) and follow-the-leader-feedback (FLF) configurations are designed. The filters are implemented using a fully-differential linear operational transconductance amplifier (OTA). PSpice simulations using a standard TSMC 0.18mum CMOS process with 1.8V power supply have shown that the cut-off frequency of both filters can be tuned from 28MHz to 44MHz, dynamic range is about 67dB and 62dB for the LF and FLF filters respectively, and power consumption is about 67mW at 30MHz for both filters. Less than 0.5dB passband ripple is achieved for both filters; 65dB and 50dB stopband attenuations are obtained for MLF LF and FLF configurations, respectively.

Item Type	Conference or Workshop Item (Other)
Identification Number	10.1109/ICECS.2008.4674849
Additional information	“This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”
Date Deposited	15 May 2025 16:23
Last Modified	25 Feb 2026 00:07