CubeSat Communication Architectures for the ESA RAMSES Mission

Concari, Paolo (2026) CubeSat Communication Architectures for the ESA RAMSES Mission. Masters thesis, University of Hertfordshire.
Copy

This thesis investigates communication architectures for CubeSats deployed as part of the ESA RAMSES mission to the near-Earth asteroid (99942) Apophis during its exceptional close encounter with Earth in April 2029. Two CubeSat configurations are defined: an orbiter (RCS1) and a lander (RCS2), both subject to severe constraints in power, mass, volume and antenna accommodation. The study focuses on scientific telemetry return and evaluates two candidate architectures: Direct-To-Earth (DTE) communication and relay via an Inter-Satellite-Link (ISL) through the RAMSES spacecraft. The originality of the research lies in the mission-specific integration and application of established communication-analysis methods to the RAMSES CubeSat cases. A communication modelling and assessment framework is developed that combines time-varying Earth–Apophis and local spacecraft geometry, Apophis rotational behaviour, antenna radiation patterns, link feasibility, discrete communication modes and cumulative data return. This provides a consistent basis for comparing DTE and ISL for both the orbiting and landed CubeSat configurations. For RCS2, a statistical treatment of the landed population accounts for variations in landing location and initial conditions, allowing communication performance and robustness to be assessed beyond a single nominal landing case. The results show that the two CubeSat cases lead to different communication-architecture implications. For RCS1, DTE and ISL provide approximately 39.6 Gbit and 62.1 Gbit, respectively, over the analysed mission interval. DTE is strongly dependent on the Earth–Apophis range and returns most of its data around close approach, whereas ISL provides a more sustained data-return profile with lower onboard resource demand. For RCS2, performance is strongly dependent on the realised surface geometry and asteroid rotational state. At 60 h, the median DTE and ISL returns are approximately 0.59 Gbit and 1.5 Gbit, respectively. DTE can achieve approximately 10–11 Gbit under favourable conditions but has weak median and lower-tail performance. ISL provides more consistent performance across the landed population, although its median return remains below the assumed 9.2 Gbit data allocation. The thesis supports the adoption of ISL as the preferred combined architecture for the RAMSES CubeSats, using RAMSES as the Earth-return path. This conclusion is strongest for RCS1, while RCS2 requires further refinement, particularly to consolidate the data-volume capability of the landed ISL architecture. The work identifies the principal performance, robustness, resource and operational factors governing the architecture trade-off and provides a structured basis for early-phase CubeSat communication-architecture assessment for RAMSES and other relay-based small-body mission concepts.


picture_as_pdf
24128458 CONCARI Paolo Final Thesis.pdf
Available under Creative Commons: BY 4.0

View Download

EndNote BibTeX Reference Manager Refer Atom Dublin Core OpenURL ContextObject Data Cite XML OPENAIRE HTML Citation RIOXX2 XML MPEG-21 DIDL METS OpenURL ContextObject in Span MODS ASCII Citation
Export

Downloads