Date Item Type No Grouping

Characterisation and activation of graphite mine tailings for use in cementitious binders. (2025) Surya Maruthupandian, Napoleana-Anna Chaliasou, Sufyan Akram, Andreas Chrysanthou and Antonios Kanellopoulos

Effect of Alternating Magnetic Field Treatment on the Friction/Wear Resistance of 20Cr2Ni4A Under Lubricated Conditions. (2025) Sufyan Akram, Mose Bevilacqua, Anatolii Babutskyi and Andreas Chrysanthou

Microstructure Evolution of Cementitious Matrices Utilising Graphite Mine Tailing as Supplementary Cementitious Materials. (2024) Surya Maruthupandian, Andreas Chrysanthou and Antonios Kanellopoulos

Design and development of a small-scale cement-based 3D printing robot extrusion nozzle. (2024) Oluwatimilehin Disu, S. O. Ismail, Luke Wood, Andreas Chrysanthou and Antonios Kanellopoulos

Dielectrophoretic collection of airborne particles. (2024) Etelka Chung, Milad Heidari Koochi, Lanka Weerasiri, Ian Munro, Ian Johnston, Andreas Chrysanthou and Loic Coudron

Improved corrosion and cavitation erosion resistance of laser-based powder bed fusion produced Ti-6Al-4V alloy by pulsed magnetic field treatment. (2024) Mohin Ma, Sufyan Akram, Anatolii Babutskyi, Andreas Chrysanthou, Edward Randviir and Aidan M. Doyle

Use of Hydrogen Peroxide Vapour for Microbiological Disinfection in Hospital Environments: A Review. (2024) Aaqib Ayub, Yuen Ki Cheong, Jesus Calvo Castro, Oliver Cumberlege and Andreas Chrysanthou

Improvement of cavitation erosion resistance of structural metals by alternating magnetic field treatment. (2023) Anatolii Babutskyi, Sufyan Akram, Mose Bevilacqua, Andreas Chrysanthou, Diogo Montalvão, Mark J. Whiting and Nada Pizurova

Glass-ceramic joining of Fe22Cr porous alloy to Crofer22APU: interfacial issues and mechanical properties. (2022) Fabiana D' Isanto, Milena Salvo, Sebastian Molin, Damian Koszelow, Hassan Javed, Sufyan Akram, Andreas Chrysanthou and Federico Smeacetto

Improvement of the wear resistance of EN8 steel by application of alternating magnetic field treatment. (2021) Sufyan Akram, Andreas Chrysanthou, Anatolii Babutskyi, Diogo Montalvão, Mark J. Whiting and Om Prakash Modi

Improvement of the wear resistance of nickel-aluminium bronze and 2014-T6 aluminium alloy by application of alternating magnetic field treatment. (2021) Sufyan Akram, Anatolii Babutskyi, Andreas Chrysanthou, Diogo Montalvão, Mark Whiting and Nada Pizurova

Effect of high-density current electropulsing on corrosion cracking of titanium aluminide intermetallic. (2021) Anatolii Babutskyi, Andreas Chrysanthou, Ganna Chyzhyk, Maider G. de Cortazar, Pedro Egizabal and Marija Smelina

Development and characterisation of a Y2Ti2O7-based glass-ceramic as a potential oxidation protective coating for titanium suboxide (TiOx). (2021) Fabiana D' Isanto, Federico Smeacetto, Hans-Peter Martin, Richard Sedlak, Maksym Lisnichuk, Andreas Chrysanthou and Milena Salvo

Effect of Alternating Magnetic Field on the Fatigue Behaviour of EN8 Steel and 2014-T6 Aluminium Alloy. (2019) Sufyan Akram, Anatolii Babutskyi, Andreas Chrysanthou, Diogo Montalvao and Nadezda Pizurova

Proceedings of Abstracts Engineering and Computer Science Research Conference 2019. (2019) Richard Nwawe, Marzio Grasso, Yong Kang CHEN, Jan Klusak, Vincenzo Rosiello, Nathan Counsell, Mohammad Reza Herfatmanesh, Helen Partou, Catherine Menon, Trevor Barker, Vito Veneziano, Raimund Kirner, Olga Tveretina, Alok Verma, Peter Lane, Mariana Lilley, Paul Canoville, Matthew Robinson, Brian Crook, Samantha Hall, Richard Kaye, Ian Johnston, Daniel McCluskey, Mark Tracey, Ian Munro, Yuan Wang, Bjorn Suckow, Ingo Klaholz, Damien Drix, Verena Vanessa Hafner, Michael Schmuker, Ankur Sinha, Christoph Metzner, Neil Davey, Roderick Adams, Volker Steuber, Rebecca Miko, Gilles Toffe, Guogang Ren, Diogo Montalvão, Sikiru O. Ismail, James Newman, Hom Dhakal, Funlade Sunmola, Deepak Panday, Na Helian, Daerefa-a Amafabia, Opukuro David-West, George Haritos, Pascal Schirmer, Iosif Mporas, Grigorios Skaltsas, Rana Siadati, Paul Wernick, Samuel Sutton, Himayasri Rao Lekkala, Paul Sayers, Imran Khan, Lola Cañamero, Eheda Hassan, Mouloud Denai, Georgios Pissanidis, Julia Goncharenko, Maria Schilstra, Nathan Beka, Rene te Boekhorst, Agnes Bonivart, Chrystopher Nehaniv, Shabnam Kadir, Ronakben Bhavsar, Yi Sun, David Mayor, Tony Steffert, Yong Kang CHEN, Andreas Chrysanthou, Ian Johnston, Raimund Kirner, Pandelis Kourtessis, Daniel McCluskey, Daniel Polani, Volker Steuber and Yichuang Sun

Low-velocity impact behaviour of woven laminate plates with fire retardant resin. (2019) Marzio Grasso, yigeng xu, Amit Ramji, Gang Zhou, Andreas Chrysanthou, George Haritos and Yong Kang Chen

Assessment of supply interruption of rhenium, recycling, processing sources and technologies. (2019) Uchenna Kesieme, Andreas Chrysanthou and Maurizio Catulli

Attributional life cycle assessment of biofuels for shipping: addressing alternative geographical locations and cultivation Systems. (2019) Uchenna Kesieme, Kayvan Pazouki, Alan Murphy and Andreas Chrysanthou

Biofuel as an alternative shipping fuel : technological, environmental and economic assessment. (2019) Uchenna Kesieme, Kayvan Pazouki, Alan Murphy and Andreas Chrysanthou

Effect of electric load and dual atmosphere on the properties of an alkali containing diopside-based glass sealant for solid oxide cells. (2019) Antonio G. Sabato, Axel Rost, Jochen Schilm, Mihails Kusnezoff, Milena Salvo, Andreas Chrysanthou and Federico Smeacetto

A review of acid recovery from acidic mining waste solutions using solvent extraction. (2018) Uchenna Kesieme, Andreas Chrysanthou, Maurizio Catulli and Chu Yong Cheng

A two-stage approach of manufacturing FeAl40 iron aluminides by self-propagating synthesis and pressureless sintering. (2018) Zhenxue Zhang and Andreas Chrysanthou

The optimal use of tris-2-ethylhexylamine to recover hydrochloric acid and metals from leach solutions and comparison with other extractants. (2018) Uchenna Kesieme, Andreas Chrysanthou, Maurizio Catulli and Chu Yong Cheng

Interface stability between bare, Mn-Co spinel coated AISI 441 stainless steel and a diopside-based glass-ceramic sealant. (2018) Antonio G. Sabato, Andreas Chrysanthou, Milena Salvo, G. Cempura and Federico Smeacetto

Self-piercing riveting-a review. (2017) Dezhi Li, Andreas Chrysanthou, Imran Patel and Geraint Williams

Effect of pulsed magnetic treatment on the corrosion of titanium. (2017) Anatolii Babutskyi, Andreas Chrysanthou, Marija Smelina, Gennadii Stepanov and Maciej Ziętara

Glass-ceramic sealant for solid oxide fuel cells application: Characterization and performance in dual atmosphere. (2016) A. G. Sabato, G. Cempura, D. Montinaro, A. Chrysanthou, M. Salvo, E. Bernardo, M. Secco and F. Smeacetto

Effect of Plastic Deformation on Compliance Curve Based Crack Closure Measurement. (2016) Andrew Lewis, Muhodin Mohin, Andreas Chrysanthou and Yigeng Xu

A review of the catalytic oxidation of carbon-carbon composite aircraft brakes. (2015) Mose Bevilacqua, Anatolii Babutskyi and Andreas Chrysanthou

Chord line force versus displacement for thin shallow arc pre-curved bimetallic strip. (2015) G. D. Angel, G. Haritos, A. Chrysanthou and V. Voloshin

Correlation of dent depth to maximum contact force and damage of composite laminates. (2015) Zeng Shen, Yigeng Xu and A. Chrysanthou

Novel glass-ceramic composition as sealant for SOFCs. (2014) Federico Smeacetto, Auristela De Miranda, A. Chrysanthou, Enrico Bernardo, Michele Secco, Massimiliano Bindi, Milena Salvo, Antonio G. Sabato and Monica Ferraris

Effect of pulsed magnetic field pre-treatment of AISI 52100 steel on the coefficient of sliding friction and wear in pin-on-disk tests. (2014) Anatolii Babutskyi, Andreas Chrysanthou and Chuanli Zhao

Contact behaviour of composite laminate under quasi-static indentation load. (2014) Zeng Shen, Yigeng Xu and A. Chrysanthou

Thermal cycling and ageing of a glass-ceramic sealant for planar SOFCs. (2011) F. Smeacetto, A. Chrysanthou, M. Salvo, T. Moskalewicz, F. D'Herin Bytner, L. C. Ajitdoss and M. Ferraris

Comparison between the thermal properties of fully dense and porous NiTi SMAs. (2010) C. Zanotti, P. Giuliani, P. Bassani, Z. Zhang and A. Chrysanthou

Cast in situ Cu–TiC composites : synthesis by SHS route and characterization. (2009) S. Rathod, O.P. Modi, B.K. Prasad, A. Chrysanthou, D. Vallauri, V.K. Deshmukh and A.K. Shah

Performance and testing of glass-ceramic sealant used to join anode-supported-electrolyte to Crofer22APU in planar solid oxide fuel cells. (2009) F. Smeacetto, A. Chrysanthou, M. Salvo, Z. Zhang and M. Ferraris

Characterization and performance of glass-ceramic sealant to join metallic interconnects to YSZ and anode-supported-electrolyte in planar SOFCs. (2008) F. Smeacetto, M. Salvo, A. Ferraris, V. Casalegno, P. Asinari and A. Chrysanthou

Evaluation of quality and behaviour of self-piercing riveted aluminium to high strength low alloy sheets with different surface coatings. (2008) Li Han and A. Chrysanthou

Fretting wear in self-piercing riveted aluminium alloy sheet. (2003) Y.K. Chen, L. Han, A. Chrysanthou and J.M. O'Sullivan

The effect of different metallic counterface materials and different surface treatments on the wear and friction of polyamide 66 and its composite in rolling-sliding contact. (2003) Y.K. Chen, O.P. Modi, A.S. Mhay, A. Chrysanthou and J.M. O'Sullivan

Phase equilibria in the metal-sulfur-oxygen system and selective reduction of metal oxides and sulfides : Part I. The carbothermic reduction and calcination of complex mineral sulfides. (1996) A. Jha, S. Tang and A. Chrysanthou

The behaviour of aluminium-chromium ferritic steels in simulated coal gasification atmospheres at 723 K. (1989) K.S. Coley, S.R.J. Saunders and A. Chrysanthou

Combustion synthesis in the Mo-Si-Al ternary system. (1998) S.B. Bhaduri, J.G. Huang, S. Bhaduri and A. Chrysanthou

The observation of metastable molybdenum carbides. (1991) A. Chrysanthou and P. Grieveson

Simultaneous carburisation and oxidation of niobium in the presence of carbon monoxide. (1993) A. Chrysanthou and P. Grieveson

Re-evaluation of the thermodynamic stability of calcium oxide. (1991) A. Chrysanthou and P. Grieveson

Preparation and microstructure of AlOTiC composites by self-propagated high temperature synthesis. (1994) A. Chrysanthou, A. Saidi, C.E.W. Aylott and J.V. Wood

Carbothermic reduction of a columbite concentrate to produce cemented carbides and metal-matrix composites. (1994) A. Chrysanthou, D. Macfarlane and O.S. Chinyamakobvu

Formation of silicon carbide whiskers and their microstructure. (1991) A. Chrysanthou, P. Grieveson and A. Jha

Reduction/carburisation of columbite concentrate. (1994) B.S. Terry, D.C. Azubike and A. Chrysanthou

Kinetic dissociation of nickel titanate and nickel tungstate in oxygen potential gradients. (1994) D.C. Azubike, A. Chrysanthou and B.S. Terry

Characteristics of the combustion synthesis of TiC and Fe-TiC composites. (1994) A. Saidi, A. Chrysanthou, J.V. Wood and J.L.F. Kellie

In situ preparation of copper-matrix composites. (1993) A. Chrysanthou, G. Erbaccio and J.V. Wood

Synthesis, luminescence and phase composition of samarium-doped zinc phosphate glass ceramics. (2013) Z. Stoeva, G. Patronov, A. Chrysanthou, D. Tonchev and S. Kasap

Thermal cycling of Crofer22APU-sealant-anode supported electrolyte joined structures for planar SOFCs up to 3000 h. (2013) F. Smeacetto, M. Salvo, A. Chrysanthou and T. Moskalewicz

New technologies for the reactive processing of metal-matrix composites. (1995) A. Chrysanthou

Effect of pulsed electric current treatment on the corrosion and strength of reinforcing steel. (2012) L. Kruszka, Anatolii Babutskyi, A. Chrysanthou and Chu En Tan

The effect of setting velocity on the static and fatigue strengths of self-piercing riveted joints for automotive applications. (2014) Dezhi Li, Li Han, Mike Shergold, Geraint Williams and A. Chrysanthou

Process feasibility analysis of self-pierce riveting high strength low alloy steel. (2010) L. Han, M. Thornton, R. Hewitt, A. Chrysanthou and M. Shergold

Strategic Research Agenda. (2012) A. Chrysanthou

Thermal diffusivity of Ni–Ti SMAs. (2009) C. Zanotti, P. Giuliani, G. Riva, A. Tuissi and A. Chrysanthou

Formation and microstructure of (Ti, V)C-reinforeed iron-matrix composites using self-propagating high-temperature synthesis. (2008) A. Chrysanthou, Om Prakash Modi, Li Han, Narayanrao Ramakrishnan and J.M. O'Sullivan

Erosive-corrosive wear behaviour of Fe-TiC and cobalt based layers separately deposited on En31 steel. (2007) O. P. Modi, B. K. Prasad, A. Chrysanthou, V. P. Deshmukh and A. K. Shah

Combustion synthesis and subsequent sintering of titanium-matrix composites. (2003) A. Chrysanthou, Y.K. Chen, A. Vijayan and J. O'Sullivan

Mechanical behaviour of self-piercing riveted multi-layer joints under different specimen configurations. (2007) L. Han, A. Chrysanthou and K. W. Young

The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets. (2006) Li Han, K. W. Young, A. Chrysanthou and J.M. O'Sullivan

Fretting behaviour of self-piercing riveted aluminium alloy joints under different interfacial conditions. (2006) Li Han, A. Chrysanthou and J.M. O'Sullivan

Nanostructured TiC1-X-TiB2 Composites Obtained by Metastability Processing. (2007) I. C. Atias Adrian, D. Vallauri, Z. Zhang, A. Chrysanthou, B. DeBenedetti and I. Amato

The effect of pre-straining on the mechanical behaviour of self-piercing riveted aluminium alloy sheets. (2005) L. Han, K.W. Young, R. Hewitt, A. Chrysanthou and J.M. O'Sullivan

Corrosion of structural metals treated by pulse electric current. (2010) Anatolii Babutskyi, A. Chrysanthou and John Ioannou

Effect of pulsed electric current treatment on corrosion of structural metals. (2009) Anatolii Babutskyi, A. Chrysanthou and J. Ioannou

Characterization of fretting fatigue in self-piercing riveted aluminium alloy sheets. (2006) L. Han, A. Chrysanthou, K. W. Young and J. M. O'Sullivan

TiC-TiB2 composites : A review of phase relationships, processing and properties. (2008) D. Vallauri, I. C. Atias Adrian and A. Chrysanthou

Correlation between the corrosion resistance and the hardness scattering of structural metals treated with a pulsed electric current. (2010) Anatolii Babutskyi, A. Chrysanthou, John Ioannou and I. Mamuzic

Preparation of ceramic composite powders from waste colliery minestones. (1994) A. Chrysanthou and T. Sanchuan

High-stress abrasive wear response of 0.2% carbon dual phase steel : Effects of microstructural features and experimental conditions. (2007) O. P. Modi, Pallavi Pandit, D. P. Mondal, B. K. Prasad, A. H. Yegneswaran and A. Chrysanthou

Martensitic-Austenitic phase transformation of Ni-Ti SMAs : Thermal properties. (2012) C. Zanotti, P. Giuliani and A. Chrysanthou

Production of copper-matrix composites by in situ processing. (1995) A. Chrysanthou and G. Erbaccio

Observation of intermetallic Ni3Ti whiskers during combustion synthesis reactions in the Ni-Ti-C system. (1995) A. Chrysanthou and K.H. Kassim

An investigation of the self-propagating high-temperature synthesis of Ti(Si,Al). (2005) A. Chrysanthou, E.K. Opoku and L. Han

Enhancing the dispersion of TiC in copper. (1996) A. Chrysanthou and G. Erbaccio

Reaction synthesis of carbide-reinforced cast iron. (1996) A. Chrysanthou, N.W. Davies, J. Li, P. Tsakiropoulos and O.S. Chinyamakobvu

Behaviour of tantalum in the presence of CO and CO/CO mixtures at elevated temperatures. (1995) A. Chrysanthou and P. Grieveson

A study of the combustion synthesis of MoSi and MoSi-matrix composites. (1996) A. Chrysanthou, R.C. Jenkins, M.J. Whiting and P. Tsakiropoulos

Preparation of Fe-TiC composites by the thermal-explosion mode of combustion synthesis. (1997) A. Saidi, J.V. Wood, J.L.F. Kellie and A. Chrysanthou